The owners of these instruments must request the periodic verification of these instruments every 2 years after they are put into service.
The metrological verification verifies that the temperature recorder maintains the measurement characteristics applicable to it and its use is prohibited if it does not pass this control phase.
Documentation required for periodic verification:
Request for verification.
If the instrument is repaired, modified or has broken seals, a metrological verification must also be carried out after repair prior to putting the instrument into service.
| REGULATION | METROLOGY FIELD | PERIODICITY |
|---|---|---|
| Law 32/2014 | ||
| R.D.244/2016 | Temperature recorders and thermometers. | 2YEARS |
| Order ITC/155/2020 |
Declaration of conformity (CE marking of the instrument).
Certificate of model approval.
Nameplate in accordance with UNE-EN 14830 and R.D. 244/2016.
Check that the seals are intact and bear the mark of the authorized verifying agency or repairer.
Installer's Portal
Document Verification
